Winch Details:
Whether its on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your ATV, UTV or SxS with a KFI WINCH and feel confident you can pull yourself out of any situation. This 4500lb ATV Stealth Series winch features Synthetic Cable, Cable Hook Stopper, a dynamic, mechanical, and drum braking system, Water Resistant seals to keep the elements out, a standard 4-hole mounting design and a heavy duty all metal turn clutch. It is also backed by a KFI 1-Year Limited Warranty. The KFI SE45 Stealth Winch comes with everything you need other than an ATV model specific winch mount. Everything shown is included along with detailed installation instructions and hardware to mount your winch to a model specific ATV winch mount.
38' Synthetic Cable with 5' protective sheath and end loop #SYN23-S38
Also included is a Handheld 14' CordedRemote (ATV-HR) for those situations when you need to control your winch from a distance or dismounted from your machine. This compact high quality remote offers a more reliable control than the other wireless options. Included is a socket plug and play wiring a system so that you can store your remotewhen not in use.
Take control of your winch with the included UTV Dash Rocker Switch (UTV-DRS-K). It comes with the switchand the wiring harness with the plug for easy install.The dash rocker also comes with a blue led light insideto light up your dash at night. This rocker switch allows youto control your winch with just the touch of your finger,never having to fully let go of your steering wheel.
The all New Heavy Duty Electric Contactor (ATV-CONT) protects your ATV's electrical system and switches the power distribution of your winch that is controlled by your switches.
Included is our KFI Split Cable Hook Stopper (#ATV-SCHS) with the following benefits:
- Eliminates wear and tear on your rollers from the hook with can cause cable wear.
- Eliminates hook clatter from going down the trail.
- Protects the winch motor and gears from pulling the cable in too far and bottoming out on the rollers.
- Keeps tension on the hook to eliminate the cable becoming loose.
- Also has slits designed in it to work as an anti-kick back for the cable if your cable was to snap.
- Looks great.
- Once you have one, everyone else that you ride, with will want one :)
SE45-R2 Specifications | |
Model | SE45-R2 UTV Series |
Rated Line Pull | 4500 lbs. |
Motor | 12V DC, 1.7 hp Permanent Magnet |
Gear Ratio | 166:1 |
Gear/Transmission | All-metal Planetary Gear Drive |
Brake | Dynamic and Mechanical |
Clutch (free spooling) | All Metal Cam Activated Freespool |
Drum Size | 2.0" (D) x 3.19" (L) |
Synthetic Cable | 15/64" (D) x 38' (L) Smoke color |
Fairlead | Multi-directional POM Roller |
Control | Deluxe Dash Mounted Control Switch and a Heavy Duty Corded Remote Switch |
Winch Dimensions | 14.6" L x 4.55" D x 4.82" H |
Mount Plate | Fairlead Mount Only (A Model Specific Mount is necessary for your make and model UTV) |
Mounting Bolt Pattern | 3.00" x 4.875" (4-Hole) |
Recommended Battery | 12 Amp/hour minimum |
Warranty | Limited 1 Year |
Winch Weight | 33.65 lbs. (complete kit) |
Product Code: 101560
Manufacturer: KFI Products
Brand New "KFI" Winch Mount for the below listed Polaris Ranger's:
Polaris MID-SIZE UTV | Year |
Ranger ETX | 15-16 |
Ranger EV | 10-21 |
Ranger 400 | 10-14 |
Ranger 500 | 11-13 |
Ranger 500 | 17-21 |
Ranger Crew 500 ** | 11-13 |
Ranger 570 | 14-21 |
Ranger Crew 570 ** | 14-21 |
Ranger 800 | 13-14 |
Polaris FULL-SIZE UTV | Year |
Ranger Diesel (900) | 11-14 |
Ranger Crew Diesel (900) ** | 12-14 |
Ranger 500 | 09-10 |
Ranger 570 (800 Style) | 16-21 |
Ranger Crew 570 (800 Style) ** | 16-21 |
Ranger 700 | 2009 |
Ranger 800 | 10-14 |
800 Ranger Crew 800 ** | 10-14 |
Ranger 800 6x6 | 10-16 |
** = Requires the purchase of#UTV-WEK (wire extension kit) Due to location of battery on Ranger.
Mount designed to work with the following winches:
- KFI: ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / SE25 / SE35 / SE45-R2 / U45w-R2 / SE45w-R2
- KFI : AS-50 / AS-50w
-
WARN:VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / VRX 45 / VRX 45-S
- May require adding washers to shim up to fit due to size
- WARN:A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
- WARN:RT15 / RT25 / RT30 / XT15 / XT25 / XT30 / RT40 / XT40
- WARN:Vantage 2000-3000lbs / Provantage 2500-3500lbs
- WARN:Vantage 4000lbs / Provantage 4500lbs
- RAMSEY : ATV2500 / ATV3000
- SUPERWINCH : Terra25 / Terra35 / A3500 / LT2000 / LT2500 / LT3000 / LT4000ATV / Terra 45 / LT4000UTV
- MILE MARKER :PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500
-
MASTER LOCK :1500lbs #2955AT
- Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
- CYCLE COUNTRY :Work Power 1500 and 2500 / Powermax 2500, 3500
- BADLAND: 2-Hole Winches (Click Here for Details)
- BADLAND: Standard Winches (Click Here for Details)
- BADLAND: WIDE Winches (Click Here for Details)
- CHAMPION : 2-Hole Winches (Click Here for Details)
- CHAMPION : Standard Winches (Click Here for Details)
- CHAMPION : WIDE Winches (Click Here for Details)
- KEEPER CORP. TRAKKER :KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C
-
KEEPER CORP. TRAKKER :KT2000
- Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
-
SMITTYBILT :XRC 2.0
- Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
- Listed models come with incorrect ATV roller fairleads.
- SMITTYBILT :XRC 3.0 / XRC 4.0
-
XGEAR: X3000 / X4000
- 4-Hole Standard (3.00" x 4.875" bolt pattern)
-
VENOM: 4000 / 4500 / 5000 (Hardcore Series)
- All with 3.00" x 6.600" bolt pattern mount-up
-
VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Standard ONLY)
- 4-Hole Standard 3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern
- Traveller: 1078311
-
Traveller:1078088 / 1078302
- Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF
-
Possibly many others with the below standard mounting patterns, call to confirm.
- 4-Hole Standard (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
- 2-Hole (3.10" with rollers that are 4.875" bolt pattern)
- QUADBOSS: RP25 / RP35
-
Possibly many others with the below standard mounting patterns, call to confirm.
- 4-Hole WIDE (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern)
Specifications:
- 100% MADE IN USA
- Constructed of 3/16" Grade 50 steel
- Unlike all other mount competitors, our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
- Powder coated black for supreme durability
- Very easy to install
- Complete installation instructions included
- Mounts winch tucked back behind front bumper
- Satisfaction guaranteed
- Roller fairlead and winch not included